Armidas central sweeper installation and sales agency in Karaj

Armidas Centrifugal Sweeper

study time 1 minute

Armidas central sweeper installation and sales agency in Karaj

Central vacuum cleaner installation

The central sweeper can be easily installed anywhere in the building and only needs to be visited twice a year to empty it. The best case for the vacuum cleaner is to install it outside the house, because the filters can communicate with the open air. Piping is done quickly and completely insulated with glue, these pipes are completely hidden and out of sight. Piping can be done on the roof, above the shelf, ducts, columns, kitchen and basement.

Central vacuum cleaner installation

In general, the installation and operation of this system requires its implementation by experts; But in order to familiarize you with the installation process, this section has been added to this article. First of all, it is better to know that the best time to install a central vacuum cleaner is after the installation of gas, water and sewage pipes.

1. In order to install and operate the central vacuum cleaner, the floor plan of the residential floors should be carefully examined in order to choose the best option for installing the suction outlets of the device. Remember that due to the use of stretch hose pipes (special pipes with an initial size of 2.5 meters and can be opened up to 10 meters), the installation distances of the outlets can be considered on the map with a suitable distance.
2. Choose suitable pipes for running the suction system. buy It should be noted that the pipes used are high-pressure PVC with a diameter of 50 mm, which also has antistatic properties. This feature helps prevent dust and dust particles from being absorbed.

نمایندگی نصب و فروش و اجرای جارو مرکزی آرمیداس در کرج
3. The piping starts from the highest point of the building and continues down to the place of installation of the device. In the installation process, be careful to do piping as directly as possible and from the shortest path and avoid horizontal piping with long separate lengths, because it will have a great effect on the suction rate of the device.

4. Install the suction sockets. These sockets are generally installed at a height of 50 cm and are installed with a cover to prevent dust and waste from entering the piping system. It should also be noted that the electrical and electronic system is done during the installation of the plumbing system.

As you read, piping is the most important and sensitive part of the central vacuum cleaner, and the smallest problem in its implementation is directly related to the system's operation and even sometimes makes it unusable. Therefore, it is better to entrust its implementation directly to executives and experts, or at least to do it under their supervision.

Central vacuum cleaner system standardization

What is important in the standardization of the central sweeping system is the correct selection of the piping route and the use of high-quality materials. Choosing the device model is another important point that you should pay attention to. Another important thing in complying with the system implementation standard is the selection of pipes with the right diameter.

For this purpose, they use pipes with a diameter of 40, 50, 63, 80 and 100 mm. If a separate or package system is used, only two 40 and 50 mm pipes are used. It should also be noted that choosing the shortest route for piping is the best procedure and you should not use a 90-degree elbow on the route.

For plumbing, it is better to use the last socket to do this. In the end, it should be mentioned that one of the other points that should be taken into account is the placement of the central device.

Therefore, it is important to apply all the mentioned points because if we compare the building to the human body, the central sweep of the heart and the pipes will be the veins of the body. If there is a cut, blockage or problem in a part of the veins, no matter how well the heart does its work, this issue will definitely cause a problem in a part or even the whole body. It is exactly the same in the central vacuum system, and if the implementation and installation process is not performed correctly, even a high-quality and standard device cannot work properly and meet the needs of consumers.

Central vacuum cleaner price

In general, parameters such as the size and number of floors of the building where the central sweeper is to be installed affect the cost of buying and installing the central sweeper; Therefore, after choosing the right brand, consult with experts in this field and check the price based on the building where you live. Then purchase and install a central vacuum cleaner.

Frank Latifi

Frank Latifi

نویسنده پست

8932

مقاله

مشاهده صفحه

Content production expert and SEO expert at Negargar Andisheh and Behzai Platform, expert in producing SEO-oriented textual content and organic growth strategies.

  • Central vacuum cleaner installation

  • Central vacuum cleaner installation

  • Central vacuum cleaner system standardization

  • Central vacuum cleaner price